It’s better to hang it up than to fold it up, and it’s best to use leather conditioner regularly – with the proper care, your leather jacket will still look good years later. Here we will show you how to get everything right with your new jacket.
Leather is a relatively stiff material, so always hang your leather jacket on a hanger: If your jacket is folded up in the closet, there is a risk that it will take on the folded shape and retain creases.
Always keep your leather goods dry and well-ventilated: Leather is a natural product, and as such, must be able to “breathe” – in plastic bags, for example, there is a risk that the jacket will start to get mouldy.
Also, protect your leather jacket from intense sunlight and heat: too much UV light causes the leather to fade, and too much heat makes it brittle.
Properly waterproof the leather jacket
To ensure that your leather jacket can withstand rain and cold, you should impregnate it before wearing it for the first time and regularly afterwards. Before you start, ensure your leather jacket is clean and dry by wiping it with a soft cloth.
Test the product on an inconspicuous area first to prevent discolouration or damage. Always use special leather impregnation products. Products based on animal fats or vegetable oils are best suited.
When using the agent, make sure not to saturate the jacket with it, but only apply it carefully with a sponge or cloth: If you use too much impregnating agent, it will close the pores completely, and the leather can no longer breathe.
Keep the leather jacket supple.
To ensure that your leather jacket gives you many years of pleasure, you should treat it regularly with leather conditioner. Before use, read the agent’s label carefully and only use it on the leather types described. Test the care product first on the inside or in an inconspicuous area to see any early discolouration.
If your leather jacket comes into contact with water, let it dry on moderate heat and then rub it in with a leather conditioner. Please never use shoe polish on a leather jacket – not even for leather shoes – this leaves a film on the leather that prevents your jacket from breathing.
Different types of leather
Careful care will extend the life of your leather jacket and give it a new shine. Before you start with the care, you should find out what leather your jacket is made of, as individual types of leather require different care.
A typical smooth leather, with leather texture embossed after dyeing.
Smooth leather is any leather whose grain side – i.e. the side on which the hair originally grew – has been processed outwards. It feels pleasantly cool and smooth. The surface of smooth leather can be coloured again, which closes the pores. The additional layer of colour also seals the leather: it becomes more resistant, which is why it is often used for leather jackets.
However, the original grain is no longer visible, so pieces of leather with scars or unsightly stains are often used as the base material. In some cases, an artificial grain is subsequently worked into the leather in order to imitate the leather structure.
Special features in the care of smooth leather:
Although smooth leather is quite resistant to water, you should still use a rain jacket in heavy rain.
It is sufficient if you impregnate your smooth leather jacket every 12 to 15 months.
Only polish your smooth leather jacket on special occasions; too much polishing will discolour the leather.
Aniline leather is particularly comfortable to wear but also more sensitive and expensive.
In the case of particularly beautiful and flawless leather, on the other hand, the surface is often not dyed but left natural: the pores remain open, and the natural leather structure is recognizable. This leather is called aniline leather, which feels very soft and hugs the skin, but is very sensitive to stains and water. You can recognize aniline leather by the fact that a drop of water penetrates the leather and turns it dark.
Special features in the care of aniline leather:
Aniline leather fades quickly, so always keep your aniline leather jacket out of the sun.
Avoid contact with water.
Aniline leather should be impregnated at least every eight weeks.
Suede does not have to come from wild animals – in the vernacular, any roughened leather is referred to as suede.
Suede leather is sanded on the surface; it is also referred to as nubuck and colloquially as suede. You can recognize suede by its velvety surface, which can be stroked in different directions. Nubuck leather is very comfortable to wear, but it is also very sensitive. With improper care and storage
It becomes greasy and shiny.
Peculiarities in the care of suede leather
Only impregnate with a spray, do not rub.
Do not grease or oil. Otherwise, discolouration will occur.
Don’t polish.
If there are greasy spots, there are special pads that you can use to roughen the leather again. VISIT NOW
moviestarjacket 